- infogasofuelsystem@gmail.com
- +6012 220 2213
- Semenyih, Malaysia
FE PETRO® brand submersible pumping systems set the standard by which all other fuel pumping systems are measured. With best-in-class flow rates and backed by a long history of dependability, FE PETRO® pumps are responsible for delivering fuel to thousands of customers around the globe, day in and day out.
Stop corrosion in its tracks. Special powder-coated, e-coated, and stainless steel components defend your pump and the entire fuel system from accelerated corrosion.
Avoid system damage, pumping slowdowns, and reduce filter changes by keeping harmful tank debris, sediment, and corrosion from entering your pumping system.
FE PETRO® pumps are UL listed with both UL79A (up to 85% ethanol) and UL79B (up to 20% or 100% Biodiesel).
Remote enhanced pump monitoring and control including pump-in-water automation, clogged intake escalation, tank leveling, and tank priority.
Be prepared for whatever the jobsite throws at you. Our patented telescoping pump shafts let you adjust onsite for that perfect fit.
A typical turbine model designation has up to five components to define the pump being supplied as follows:
STP XXXXX Y – A – B
STP = Basic Model Designation
XXXXX = Factory Installed Options (Model designations may include one or more of the following characters in alphabetical order.)
AP = Advanced Protection with powder-coated, e-coated, and stainless steel components, alcohol-gasoline compatible (up to E85, up to B20, and B100) (Note standard models up to 10% ethanol capable)
AG = Alcohol-gasoline compatible (up to E85, up to B20, and B100) (Note standard models up to 10% ethanol capable)
F = Floating suction adapter (1½” NPT female adapter)
K = Intake filter screen (IFS, factory installed to PMA)
*R = Model R check valve (24 psi relief / 22 psi reset for PLLD)
*W = Model W check valve (16 psi relief / 13 psi reset for PPM4000)
Y = Pump Motor Horsepower Rating
150 = 1½ hp fixed speed
150B = 1½ hp fixed speed, 50 Hz, single-phase
150C = 1½ hp fixed speed, 50 Hz, three-phase
A = Model Length (see table)
VL1 = Variable length range #1. (60″ – 88″, High Pressure: 61″ – 89″)
VL2 = Variable length range #2. (91″ – 152″, High Pressure: 92″ – 152″)
VL3 = Variable length range #3. (123″ – 214″, High Pressure: 124″ – 215″)
(Note VL2 models fit 94% of all known installations)
B = Riser Pipe Length (see diagram)
Riser pipe length is expressed as two numeric characters that indicate the total length of the riser in inches. Riser pipes are available from 7″ to 60″ in 1″ increments (additional charge for risers 31″ or longer).
| Model | Description | Model Length Range Number | Model Length Range* |
| STP150-VL1 | 1½ Hp fixed speed | VL1 | 60″ – 88″ |
| STP150-VL2 | 1½ Hp fixed speed | VL2 | 91″ – 152″ |
| STP150-VL3 | 1½ Hp fixed speed | VL3 | 123″ – 214″ |
| STPH150-VL1 | 1½ Hp high pressure fixed speed | VL1 | 61″ – 89″ |
| STPH150-VL2 | 1½ Hp high pressure fixed speed | VL2 | 92″ – 152″ |
| STPH150-VL3 | 1½ Hp high pressure fixed speed | VL3 | 124″ – 215″ |
| Model | Description | Model Length Range Number | Model Length Range* |
| STPAG150-VL1 | 1½ Hp AG fixed speed | VL1 | 60″ – 88″ |
| STPAG150-VL2 | 1½ Hp AG fixed speed | VL2 | 91″ – 152″ |
| STPAG150-VL3 | 1½ Hp AG fixed speed | VL3 | 123″ – 214″ |
| STPAGH150-VL1 | 1½ Hp AG high pressure fixed speed | VL1 | 61″ – 89″ |
| STPAGH150-VL2 | 1½ Hp AG high pressure fixed speed | VL2 | 92″ – 152″ |
| STPAGH150-VL3 | 1½ Hp AG high pressure fixed speed | VL3 | 124″ – 215″ |
| STPAP150-VL1 | 1½ Hp fixed speed with Advanced Protection | VL1 | 60″ – 88″ |
| STPAP150-VL2 | 1½ Hp fixed speed with Advanced Protection | VL2 | 91″ – 152″ |
| STPAP150-VL3 | 1½ Hp fixed speed with Advanced Protection | VL3 | 123″ – 214″ |
| STPAPH150-VL1 | 1½ Hp high pressure fixed speed with Advanced Protection | VL1 | 61″ – 89″ |
| STPAPH150-VL2 | 1½ Hp high pressure fixed speed with Advanced Protection | VL2 | 92″ – 152″ |
| STPAPH150-VL3 | 1½ Hp high pressure fixed speed with Advanced Protection | VL3 | 124″ – 215″ |
Notes:
*Model length (A) defined as the dimension from turbine manifold bottom to pump motor inlet.
Specified in model number at time of STP order.
| Model | Description |
| F | Floating suction adapter, 1½” NPT female, must be factory installed |
| K | IFS (intake filter screen) factory assembled to pump motor assembly |
| R | Model R check valve, factory installed, for Veeder-Root® PLLD Line Leak |
| W | Model W check valve, factory installed, for Red Jacket PPM4000 Line Leak |
| Model Number | Description |
|---|---|
| 400137908 | Syphon check valve, alcohol-gasoline compatible (when ordered with STP/IST) |
| 400818921 | STP-CBS, single-phase control box, with switch and lockout, 120 Volt coil |
| 402312931 | STP-DHI + SPGC-220 Guardian Series™ Single-Phase Controller bundle (220 Volt supply, 110 Volt hook) |
| 402313921 | STP-DHI-CBS, combo DHI with factory-wired STP-CBS single-phase control box |
| 402459931 | Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible |
| 402507930 | Secondary syphon kit (when two syphon primes are required for one STP) |
| 5800100220 | SPGC-220 Guardian Series™ Single-Phase Controller, 220 Volt |
| 5800300100 | STP-DHI, dispenser hook isolation for 110 Volt dispenser handle switches, up to eight each |
| Model Number | Description |
|---|---|
| 400137937 | Syphon check valve, alcohol-gasoline compatible |
| 400818922 | STP-CBBS, single-phase control box, with switch and lockout, 240 Volt coil |
| 401220965 | STP-CBB3C, three-phase 380-415 VAC magnetic starter |
| 402312932 | STP-DHIB + SPGC-220 Guardian Series™ Single-Phase Controller bundle (220 Volt supply, 240 Volt hook) |
| 402313922 | STP-DHIB-CBBS, combo DHI with factory-wired STP-CBBS single-phase control box |
| 402459931 | Model 65 psi check valve (for secondary manifolded STPs with Veeder-Root® PLLD), AG compatible |
| 402507930 | Secondary syphon kit (when two syphon primes are required for one STP) |
| 5800100220 | SPGC-220 Guardian Series™ Single-Phase Controller, 220 Volt |
| 5800300200 | STP-DHIB, dispenser hook isolation for 240 Volt dispenser handle switches, up to eight each |
| 5800103300 | STP-SCIIIC, three phase 380-415 VAC smart controller |
| Title | Type | Size | |
|---|---|---|---|
 |
FFS-0796 Submersible Turbine Pumps Datasheet.pdf | 1.95 MB | |
 |
FFS-0616 (60Hz) Pump Selection Guide.pdf | 9.11 MB | |
 |
FFS-0648 (50Hz) Pump Selection Guide.pdf | 7.67 MB | |
 |
FFS-0801 (50Hz) Submersible Turbine Pumps Datasheet.pdf | 4.72 MB | |
 |
FFS-0382 (50 Hz) 1.5 Hp Fixed Speed Submersible Turbine Pumps Datasheet.pdf | 2.11 MB |
